View ENA0241_302662.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : ENA0241
Monolithic Linear IC
LA73050
Overview
6ch 75 Video Driver
This LA73050 is a 6ch 75 Video Driver IC. The LA73050 is ideal for use the video output driver such as VCR and DVD-player equipment.
Functions
* 6dB AMP+driver (6ch)
Specifications
Maximum Ratings at Ta = 25C
Parameter Maximum supply voltage Allowable power dissipation Operating temperature Storage temperature Symbol VCC max Pd max Topr Tstg Ta 80C Conditions Ratings 7, +14 600 -20 to +80 -55 to +150 Unit V mW C C
When mounted on a 114.3x76.1x1.6mm3 glass epoxy board.
Recommended Operating Conditions at Ta = 25C
Parameter Recommending operation voltage Operating voltage range Symbol VCC VCC op Conditions Ratings 5, +9 4.0 to 5.5 +8 to +10 Unit V V
30806 MS OT B8-7297,B8-5698 No.A0241-1/6
LA73050
Electrical Characteristics at Ta = 25C, VCC = 5V, The mode with DC offset.
Ratings Parameter Current dissipation Voltage gain Frequency characteristics 1 Frequency characteristics 2 Group delay Maximum output level Control voltage H level Control voltage L level GD VO max VcntH VcntL f = 100k/4.43MHz f = 1kHz, THD = 1% Pins 7, 16 input voltage Pins 7, 16 input voltage 3.0 2.5 0 10 4.0 VCC 1.0 15 VF2 VIN = 1Vp-p, f = 100k/27MHz -25 -20 Symbol ICC1 VG VF1 No signal VIN = 1Vp-p, f = 4.43MHz VIN = 1Vp-p, f = 100k/5MHz Conditions min 56.1 5.7 -1.0 typ 66 6.2 0 max 75.9 6.7 1.0 Unit mA dB dB dB ns Vp-p V V
Design guarantee items
Ratings Parameter Video S/N Differential Gain Differential Phase Mute attenuation Cross-talk between channel Symbol VG1V DG DP VMUTEV VCTKV VIN = 1Vp-p, RAMP signal VIN = 1Vp-p, RAMP signal VIN = 1Vp-p, f = 4.43MHz VIN = 1Vp-p, f = 4.43MHz -60 -60 Conditions min typ -75 max -70 1.0 1.0 -55 -55 Unit dB % deg. dB dB
Truth Table
Pins 7, 16 H L THROUTH MUTE
Package Dimensions
unit : mm 3247A
36 19
5.6
1 0.3
18 0.2
15.0
SANYO : SSOP36(275mil)
0.1
(0.7)
0.8
1.7max
(1.5)
0.5
7.6
No.A0241-2/6
LA73050
Block Diagram
No.A0241-3/6
LA73050
Test Circuit Diagram (Using power supply)
No.A0241-4/6
LA73050
Pin Functions
Pin No. 1 2 9 10 11 21 26 30 35 36 3 6 8 12 15 17 VIN1 VIN2 VIN3 VIN4 VIN5 VIN6 Input terminal. Non-bias. It is possible to use with being directly connected with DC. When DC coupling, it is necessary to add bias after the coupling. Pin Name NC Terminal Explanation Equivalent Circuit
4 13
DCCNT1 DCCNT2
DC offset mode charge terminal between input and output When a condenser is input at the position between pin 4 (DCCNT1) and GND, the operation of IC becomes the mode with 0.3V DC offset between input and output of 1, 3, 4ch (pins 3 and 33, pins 8 and 29, pins 12 and 14). Similarly when a condenser is input at the position between pin 13 (DCCNT2) and GND, it becomes the mode with 0.6V DC offset between input and output of 2, 5, 6ch (pins 6 and 31, pins 15 and 22, pins 17 and 20). And when pins 4, 13 and GND is shorted, it becomes the mode without DC offset between input and output.
5 14 23 32 7 16
GND
Both power supply and +power supply are GND.
MUTE1 MUTE2
Changeover terminal of Mute. When the Mute terminal is Low, it is Mute. When the terminal is Open, it is Low.
Continued on next page.
No.A0241-5/6
LA73050
Continued from preceding page. Pin No. 18 19 27 28 20 22 24 29 31 33 VOUT6 VOUT5 VOUT4 VOUT3 VOUT2 VOUT1 Output terminal. Using power supply, in case of the mode with DC offset, it is possible to use without capacitor of output by setting pins 3, 8, 12 to 0.3V-bias and by setting pins 6, 15, 17 to 0.6V-bias. And in case of the mode without DC offset, it is possible to use without capacitor of output by setting each input to zero-bias. When using +power supply, both of the modes needs coupling capacitor. Pin Name -VCC. Terminal Explanation -VCC of using power supply. Using +power supply, it is GND. Equivalent Circuit
25 34
+VCC
Both power supply and +power supply are +VCC.
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products (including technical data, services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, of otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 2006. Specifications and information herein are subject to change without notice.
PS No.A0241-6/6

▲Up To Search▲

Price & Availability of ENA0241

	To Download ENA0241 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .